Product Search

    SEARCH NOW FOR ALL YOUR NAPA SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Filter Results
    Results 901-950 of 975.
    NIDEC CORP URH10S40

    NIDEC CORP

    JAPAN SERVO CO LTD

    URH10S40

    DISCONTINUED BY MANUFACTURER, REVERSIBLE MOTOR, 1250/1550RPM, 40WATT, 100/115V, 50/60HZ, 12F
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$67.03
    CAN$67.03
    Repair Yours Contact Us
    NIDEC CORP USH10S20

    NIDEC CORP

    JAPAN SERVO CO LTD

    USH10S20

    DISCONTINUED BY MANUFACTURER, SYNCHRONOUS MOTOR, THERMALLY PROTECTED, 1800RPM, 20WATT, 115V, 60HZ, 4POLE, 3.0F
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$61.21
    CAN$61.21
    Repair Yours Contact Us
    NIDEC CORP KP39HM4-016

    NIDEC CORP

    JAPAN SERVO CO LTD

    KP39HM4-016

    STEPPER MOTOR, STEP ANGLE: 3.6 DEGREES PER STEP, 12 VDC, 0.08 A
    ✓ IN STOCK!
    CAN$164.79 Buy Surplus As Low As CAN$64.28
    CAN$64.28
    Repair Yours Contact Us
    NIDEC CORP C-10P-4

    NIDEC CORP

    JAPAN SERVO CO LTD

    C-10P-4

    DISCONTINUED BY MANUFACTURER, Q-CON SPEED CONTROL UNIT, 115VAC, 60HZ
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$38.71
    CAN$38.71
    Repair Yours Contact Us
    NIDEC CORP KP6M2-078

    NIDEC CORP

    JAPAN SERVO CO LTD

    KP6M2-078

    DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, DC 3V, 1.8 DEGREES STEP
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$51.91
    CAN$51.91
    Repair Yours Contact Us
    NIDEC CORP PUDC24Z4R

    NIDEC CORP

    JAPAN SERVO CO LTD

    PUDC24Z4R

    FAN, DC PIXIES 25 III, 7 BLADE, BRUSHLESS, 0.1AMP, 2.4W, 24VDC, 2 WIRE
    ✓ IN STOCK!
    CAN$64.19 Buy Surplus As Low As CAN$23.53
    CAN$23.53
    NIDEC CORP SMD-301

    NIDEC CORP

    JAPAN SERVO CO LTD

    SMD-301

    DISCONTINUED BY MANUFACTURER, POWER SUPPLY, 50 VAC MAX, 3 AMP/PHASE MAX
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$50.21
    CAN$50.21
    Repair Yours Contact Us
    NIDEC CORP KP3P8-504

    NIDEC CORP

    JAPAN SERVO CO LTD

    KP3P8-504

    DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, 16V DC, 130OHM, 7.5DEGREE/STEP, 8IN LEADS
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$73.82
    CAN$73.82
    Repair Yours Contact Us
    NIDEC CORP KT86LM1-001

    NIDEC CORP

    JAPAN SERVO CO LTD

    KT86LM1-001

    DISCONTINUED BY MANUFACTURER, SERVO MOTOR, TRYSYN, KT86 SERIES, 3 PHASE, 1.2 STEP ANGLE, 5.4VDC, 2NM HOLDING TORQUE, 0.1NM DETENT TORQUE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$61.13
    CAN$61.13
    Repair Yours Contact Us
    NIDEC CORP DME60B8HPB

    NIDEC CORP

    JAPAN SERVO CO LTD

    DME60B8HPB

    DISCONTINUED BY MANUFACTURER, MOTOR, DME60 SERIES, 24 VDC, 4300 RPM
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$195.34
    CAN$195.34
    Repair Yours Contact Us
    NIDEC CORP 6H15N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H15N-21

    GEAR HEAD, 37.50 OZ-IN, 2.6 X 10.4 NM, STANDARD SHAFT, 15 RATIO, 120 RPM, 3.0 W, 60 HZ, FOR REVERSIBLE MOTORS
    ✓ IN STOCK!
    CAN$25.00 Buy Surplus As Low As CAN$12.69
    CAN$12.69
    NIDEC CORP 6H1800N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H1800N-21

    GEAR HEAD, STANDARD SHAFT, 1800 RATIO, 1 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$25.95 Buy Surplus As Low As CAN$9.57
    CAN$9.57
    NIDEC CORP 6H180N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H180N-21

    GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, STANDARD SHAFT, 180 RATIO, 10 RPM, 3.0 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$28.84 Buy Surplus As Low As CAN$9.83
    CAN$9.83
    NIDEC CORP 6H25N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H25N-21

    GEAR HEAD, 76.39 OZ-IN, 5.4 X 10.4 NM, SINGLE SPEED, 25 RATIO, 56 RPM, 2.40 X 2.40 INCH, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$28.84 Buy Surplus As Low As CAN$12.14
    CAN$12.14
    NIDEC CORP 8H100N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H100N-21

    DISCONTINUED BY MANUFACTURER, GEAR HEAD, SINGLE SPEED, 555.56 OZ-IN, 39.2 X 10.4 NM, 100 RATIO, 0.75 RPM, 3.15 X 3.15 INCH, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$32.10
    CAN$32.10
    NIDEC CORP 8H15FBN-100

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H15FBN-100

    GEAR HEAD, PALM MINI PLUS TYPE, 1.2 NM, 170 OZ-IN, 100 W, 14 VDC
    ✓ IN STOCK!
    CAN$87.95 Buy Surplus As Low As CAN$32.12
    CAN$32.12
    NIDEC CORP 8H15N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H15N-21

    GEAR HEAD, STANDARD SHAFT, 152.78 OZ-IN, 10 X 10.4 NM, 15 RATIO, 15 W, 120 RPM, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$33.16 Buy Surplus As Low As CAN$11.07
    CAN$11.07
    NIDEC CORP 8H1800N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H1800N-21

    GEAR HEAD, STANDARD SHAFT, 555.56 OZ-IN, 39 X 10.4 NM, 1800 RATIO, 1 RPM, 20 W, 60 HZ, FOR REVERSIBLE MOTORS
    ✓ IN STOCK!
    CAN$80.74 Buy Surplus As Low As CAN$32.66
    CAN$32.66
    NIDEC CORP 8H36N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H36N-21

    GEAR HEAD, STANDARD SHAFT, 444.44 OZ-IN, 36 RATIO, 50 RPM, 20 W, 60 HZ, FOR REVERSIBLE MOTORS
    ✓ IN STOCK!
    CAN$61.51 Buy Surplus As Low As CAN$37.79
    CAN$37.79
    NIDEC CORP 8H375N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H375N-21

    GEAR HEAD, 8H10XN DECIMAL GEAR 1 / 35 LB-IN, 375 RATIO, 4.8 RPM, 2-15 W, FOR USH SYNCHRONOUS MOTOR
    ✓ IN STOCK!
    CAN$49.02 Buy Surplus As Low As CAN$15.99
    CAN$15.99
    NIDEC CORP 8H5N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H5N-21

    GEAR HEAD, 1.8 LB-IN, 5 RATIO, 360 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
    ✓ IN STOCK!
    CAN$23.07 Buy Surplus As Low As CAN$8.88
    CAN$8.88
    NIDEC CORP 8H60N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H60N-21

    GEAR HEAD, STANDARD SHAFT, 83.33 OZ-IN, 5.9 X 10.4 NM, 6 RATIO, 20 W, 60 HZ, FOR REVERSIBLE MOTORS
    ✓ IN STOCK!
    CAN$43.26 Buy Surplus As Low As CAN$17.46
    CAN$17.46
    NIDEC CORP D0925C12B6AZ-00

    NIDEC CORP

    JAPAN SERVO CO LTD

    D0925C12B6AZ-00

    DISCONTINUED BY MANUFACTURER, DC FAN BLOWER / BRUSHLESS, GENTLE TYPHOON, D0925C SERIES, 35 DB, 3750 RPM, 200 MA, 12 VDC, 92 X 25 MM, 0.22 LB.
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$5.52
    CAN$5.52
    NIDEC CORP D0925C12B8AP-22

    NIDEC CORP

    JAPAN SERVO CO LTD

    D0925C12B8AP-22

    DISCONTINUED BY MANUFACTURER, DC FAN / BRUSHELSS, D0925C SERIES, 0.33 AMP, SINGLE PHASE, 4 POLE, 12 VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$4.02
    CAN$4.02
    NIDEC CORP D0938X12B8AP-18

    NIDEC CORP

    JAPAN SERVO CO LTD

    D0938X12B8AP-18

    DC FAN / BRUSHELSS, 0.6 AMP, SINGLE PHASE, 4 POLE, 12 VDC
    ✓ IN STOCK!
    CAN$20.59 Buy Surplus As Low As CAN$9.03
    CAN$9.03
    NIDEC CORP FY8PF25N-D3

    NIDEC CORP

    JAPAN SERVO CO LTD

    FY8PF25N-D3

    DISCONTINUED BY MANUFACTURER, DC MOTOR, FYD SERIES, PALM MINI PLUS, PINION SHAFT, 30 PR, 200 MNM, 1500 R/MIN, 25 W, 2.3 AMP, 24 VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$26.47
    CAN$26.47
    NIDEC CORP KT60LM1-X52

    NIDEC CORP

    JAPAN SERVO CO LTD

    KT60LM1-X52

    STEPPER MOTOR / HYBRID, KT SERIES, NEMA 23, 1.2 DEGREE / STEP, 2.2 AMP, 3 PHASE, 4.84 VDC, 4 PIN MALE CONNECTOR
    ✓ IN STOCK!
    CAN$86.77 Buy Surplus As Low As CAN$40.82
    CAN$40.82
    NIDEC CORP 8DG250

    NIDEC CORP

    JAPAN SERVO CO LTD

    8DG250

    GEARBOX, 1.5 RPM, 50 HZ, 3.923 NM
    ✓ IN STOCK!
    CAN$100.01 Buy Surplus As Low As CAN$50.80
    CAN$50.80
    NIDEC CORP KP56HM2-027

    NIDEC CORP

    JAPAN SERVO CO LTD

    KP56HM2-027

    DISCONTINUED BY MANUFACTURER, STEPPING MOTOR, 12 VDC, 1.8 DEG/STEP
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$80.17
    CAN$80.17
    Repair Yours Contact Us
    NIDEC CORP 6H12.5N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H12.5N-21

    GEAR HEAD, 41.67 OZ-IN, 2.9 X 10.4 NM, SINGLE SPEED, 12.5 RATIO, 110 RPM, 2.40 X 2.40 INCH, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$25.95 Buy Surplus As Low As CAN$8.22
    CAN$8.22
    NIDEC CORP 6H120N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H120N-21

    GEAR HEAD, STANDARD SHAFT, 120 RATIO, 15 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$27.40 Buy Surplus As Low As CAN$10.25
    CAN$10.25
    NIDEC CORP 6H30N

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H30N

    DISCONTINUED BY MANUFACTURER, GEAR HEAD, 30 RATIO, FOR 60 MM SQUARE, INDUCTION, REVERSIBLE
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$14.56
    CAN$14.56
    NIDEC CORP 6H50N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H50N-21

    GEAR HEAD, 138.89 OZ-IN, 9.8 X 10.4 NM, SINGLE SPEED, 50 RATIO, 28 RPM, FOR REVERSIBLE MOTORS
    ✓ IN STOCK!
    CAN$27.67 Buy Surplus As Low As CAN$15.64
    CAN$15.64
    NIDEC CORP 6H60N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H60N-21

    GEAR HEAD, 7.0 LB-IN, 60 RATIO, 30 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
    ✓ IN STOCK!
    CAN$29.41 Buy Surplus As Low As CAN$17.14
    CAN$17.14
    NIDEC CORP 6H6N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H6N-21

    GEAR HEAD, 0.78 LB-IN, 6 RATIO, 300 RPM, 0.5-3 W, 1.65 X 1.65 INCH, FOR UIH SERIES INDUCTION MOTORS
    ✓ IN STOCK!
    CAN$24.51 Buy Surplus As Low As CAN$8.88
    CAN$8.88
    NIDEC CORP 6H90N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    6H90N-21

    GEAR HEAD, STANDARD SHAFT, 90 RATIO, 20 RPM, 2 W, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$27.40 Buy Surplus As Low As CAN$10.25
    CAN$10.25
    NIDEC CORP 8H180N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H180N-21

    GEAR HEAD, STANDARD SHAFT, 180 RATIO, 15 W, 10 RPM, 60 HZ, FOR MOTORS WITH CONTROLLER UNITS
    ✓ IN STOCK!
    CAN$53.35 Buy Surplus As Low As CAN$22.02
    CAN$22.02
    NIDEC CORP 8H18N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H18N-21

    GEAR HEAD, 8H10XN DECIMAL GEAR, 6.3 LB-IN, 18 RATIO, 100 RPM, 2-15 W, 3.15 X 3.15 INCH, FOR USH SYNCHRONOUS MOTOR
    ✓ IN STOCK!
    CAN$37.49 Buy Surplus As Low As CAN$13.67
    CAN$13.67
    NIDEC CORP 8H250N-21

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H250N-21

    GEAR HEAD, SINGLE SPEED, 555.56 OZ-IN, 39.2 X 10.4 NM, 250 RATIO, 5.5 RPM, FOR REVERSIBLE MOTORS
    ✓ IN STOCK!
    CAN$46.14 Buy Surplus As Low As CAN$18.99
    CAN$18.99
    NIDEC CORP 8H30FBN-100

    NIDEC CORP

    JAPAN SERVO CO LTD

    8H30FBN-100

    GEAR HEAD, FYD SERIES, 290 OZ-IN, 2100 MN-M, 30 RATIO, 6.7-50 R/MIN
    ✓ IN STOCK!
    CAN$85.07 Buy Surplus As Low As CAN$34.19
    CAN$34.19
    NIDEC CORP D1751M24B3AS-00

    NIDEC CORP

    JAPAN SERVO CO LTD

    D1751M24B3AS-00

    DC FAN / BRUSHELSS, D1751M SERIES, 54 DB, 240 CFM, 3200 R/MIN, 600 MA, 24 VDC
    ✓ IN STOCK!
    CAN$126.88 Buy Surplus As Low As CAN$50.87
    CAN$50.87
    NIDEC CORP E0720H24B7AZ-00

    NIDEC CORP

    JAPAN SERVO CO LTD

    E0720H24B7AZ-00

    BLOWER / DC BRUSHLESS, E0720H SERIES, 42 DB, 9.5 CFM, 4400 MIN/1, 120 MA, 24 VDC
    ✓ IN STOCK!
    CAN$56.23 Buy Surplus As Low As CAN$22.78
    CAN$22.78
    NIDEC CORP E0720H24B8AZ-00

    NIDEC CORP

    JAPAN SERVO CO LTD

    E0720H24B8AZ-00

    BLOWER / DC BRUSHLESS, E0720H SERIES, 44 DB, 10.2 CFM, 4750 MIN/1, 140 MA, 24 VDC
    ✓ IN STOCK!
    CAN$20.19 Buy Surplus As Low As CAN$6.76
    CAN$6.76
    NIDEC CORP E0720L12B8AZ-77

    NIDEC CORP

    JAPAN SERVO CO LTD

    E0720L12B8AZ-77

    DISCONTINUED BY MANUFACTURER, BLOWER / DC BRUSHLESS, E0720L SERIES, SUPER SILENT, 41 DB, 10.9 CFM, 3750 MIN/1, 0.3 AMP, 12 VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$4.56
    CAN$4.56
    NIDEC CORP E1540H24B7CZ-45

    NIDEC CORP

    JAPAN SERVO CO LTD

    E1540H24B7CZ-45

    DISCONTINUED BY MANUFACTURER, BLOWER / DC BRUSHLESS, E1540H SERIES, SUPER SILENT, 56 DB, 71 CFM, 0.74 AMP, SINGLE PHASE, 4 POLE, 24 VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$8.48
    CAN$8.48
    NIDEC CORP FBDC12H7P-949

    NIDEC CORP

    JAPAN SERVO CO LTD

    FBDC12H7P-949

    DISCONTINUED BY MANUFACTURER, BLOWER / DC, FBDC MARK 3 SERIES, 8.2 W, 0.68 AMP, SINGLE PHASE, 4 POLE, 12 VDC, 2-BLOWER SET
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$6.17
    CAN$6.17
    NIDEC CORP FBDC24H7

    NIDEC CORP

    JAPAN SERVO CO LTD

    FBDC24H7

    BLOWER / DC, FBDC MARK 3 SERIES, 52 DB, 26.5 CFM, 3700 R/MIN, 340 MA, 24 VDC
    ✓ IN STOCK!
    CAN$41.81 Buy Surplus As Low As CAN$15.18
    CAN$15.18
    NIDEC CORP KA60KM2-552

    NIDEC CORP

    JAPAN SERVO CO LTD

    KA60KM2-552

    DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KA60 SERIES, NEMA 23, 1.8 DEGREE / STEP, 1.37 OHM, 4.5 MH, 50 MN-M, 2.2 AMP, 2 PHASE, 3.01 V, 2.36 X 2.36 INCH, 1.5 LBS.
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$13.67
    CAN$13.67
    NIDEC CORP KH39EM2-091

    NIDEC CORP

    JAPAN SERVO CO LTD

    KH39EM2-091

    DISCONTINUED BY MANUFACTURER, STEPPER MOTOR / HYBRID, KH39EM2 SERIES, INTERMITTENT DUTY, 1.8 FULL STEP, 1200 PPS, 2 PHASE, 6.0 VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$2.58
    CAN$2.58
    NIDEC CORP KH39GM2-010

    NIDEC CORP

    JAPAN SERVO CO LTD

    KH39GM2-010

    DISCONTINUED BY MANUFACTURER, STEPPER MOTOR, CONTINUOUS DUTY, 1.8 FULL STEP, 850 PPS, 73.5 MN-M, 0.47 AMP, 2 PHASE, 6.4 VDC
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$6.33
    CAN$6.33
    Previous Next
    10 11 12 13 14 15 16 17 18 19 20