SEARCH NOW FOR ALL YOUR ENC SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Filter Results
ENCODER PRODUCTS COMPANY
25TC-05SG-1200NV1R3PP-SMZ-S3CE
ENCODER, MODEL 25T, INCREMENTAL, THRU-BORE, CORROSION RESISTANT, 1/2" BORE, 1200 CPR, 5 TO 28 VDC, PUSH-PULL OUTPUT, 8-PIN M12 OPTIONAL WIRING CONNECTOR, IP66, CE MARKED
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
58TP-13SE-A1024B5HV-S-MK-T6S3
ENCODER, THRU-BORE, 14MM BORE, 2.75" B.C. 3-POINT FLEX MOUNT, CPR PROGRAMMING RANGE 1-16,384, 1024 CPR, PROGRAMMABLE WAVEFORM, LINE DRIVER, 12MM 8-PIN M12 CONNECTOR-40 TO 100 DEGREES, IP66
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725I-S-S-1024-D-HV-1-S-1-SG-N-N SPEC717-05
ENCODER, SIZE 25, 2.5", HEAVY DUTY INDUSTRIAL WITH INTERNAL FLEX MOUNT, .375" SHAFT, 0-70 DEGREES C, 1024 CPR, REVERSE QUADRATURE A&B WITH INDEX, LINE DRIVER, 100KHZ, 2.5" MOUNTING, IP66, SI ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
SPEC806-01
DISCONTINUED BY MANUFACTURER, ENCODER 8POLE 5INPUT
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725N-S-S-1000-D-HV-1-F-1-SX-N-N
INCREMENTAL SHAFT ENCODER, MODEL 725, STANDARD HOUSING, 3/8"; 0.375" SHAFT SIZE, 0° TO 70° DEGREES C OP TEMP, 1000 CYCLES/REV, REVERSE QUADRATURE A&B W/INDEX, LINE DRIVER OUTPUT, STANDARD 10 ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
755A-01-S-0012-Q-HV-1-S-S/12.00-N
DISCONTINUED BY MANUFACTURER, INCREMENTAL HOLLOW BORE ENCODER, 5 VDC INPUT, 1/4 INCH BORE, 0-70 C, 12 CYCLES PER REVOLUTION, QUADRATURE A & B, 100 KHZ MAX FREQUENCY, STANDARD FLEX MOUNT, 18 ...
✓ IN STOCK!
Buy Surplus As Low As
CAN$696.92
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
755A-01-S-2500-R-HV-1-S-S/8-N
DISCONTINUED BY MANUFACTURER, INCREMENTAL HOLLOW BORE ENCODER, 1/4 INCH BORE, 0-70 C, 2500 CYCLES PER REVOLUTION, QUADRATURE A & B WITH INDEX, 100 KHZ MAX FREQUENCY, FLEX MOUNT, 18 INCH CABL ...
✓ IN STOCK!
Buy Surplus As Low As
CAN$696.92
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
15T-02SA-5000A5RHV-F00
ENCODER, THRU-BORE, .375" BORE, 46 MM TWO HOLE FLEX MOUNT, 5000 CYCLES PER REVOLUTION, 4 POLE, 5 VDC, QUADRATURE A & B WITH INDEX, LINE DRIVER, 18" CABLE
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
15T-04SB-2000A5RHV-F00
ENCODER, THRU-BORE, 6 MM BORE, 29 MM SLOTTED FLEX MOUNT, 2000 PULSES, 4 POLE, 5 VDC, LINE DRIVER, 18' CABLE
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725N-S-S-0120-Q-HV-1-F-N-SY-N-N
ENCODER, MODEL 725, STANDARD HOUSING, STANDARD SHAFT, 0-70 C, 120 CYCLES PER REVOLUTION
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
260-N-B-01-S-0200-Q-PP-1-S-SF-4-N
ROTARY ENCODER, INCREMENTAL, OPEN COLLECTOR, 260 SERIES, 5-28VDC
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
25TC-05SG-1200NV1R3PP-SMK-S3CE
ENCODER, BORE SIZE: 1/2, MOUNTING: 3.5>5.9 1PT TARM, CPR: 1200, INPUT VOLTAGE: V1 5-28 VDC, CHANNELS: GATED TO A&B, OUTPUT TYPE: PUSH-PULL, CONNECTOR: 8-PIN M12, TEMP: -20->85C, IP66, CE CER ...
✓ IN STOCK!
Repair Yours
Contact Us
TURCK
INTERLINK BT
BD2DT1EX1EU
DISCONTINUED BY MANUFACTURER, NETWORK STATION, AIM SERIES (FDN/FEN/FLD/FXD), ASI/CDN/PDP/REP, SENSOPLEX NETWORK CABLE AND CORDSETS, JUNCTIONS, TEES, RELATED ACCESSORIES, NO REPLACEMENT
✓ IN STOCK!
Buy Surplus As Low As
CAN$665.87
ENCODER PRODUCTS COMPANY
ACCUCODER
15H-02SD-2048E05RHV-A00
INCREMENTAL ENCODER, ACCUCODER MODEL 15H, HOLLOW BORE, BORE SIZE 3/8 INCH, SLOTTED FLEX MOUNT 1.575 INCH (40MM), 2048 CYCLES PER REVOLUTION, 10 POLE, INPUT VOLTAGE 5 VDC, QUADRATURE A AND B ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725N-4-S-0060-K-PU-1-L-1-EY-N-N
INCREMENTAL SHAFT ENCODER, MODEL 725, STANDARD HOUSING, 1/4 INCH SHAFT, 100 KHZ, 0-70 C, IP66 SEAL, 7-PIN MS, PULL-UP RESISTOR OUTPUT, END CONNECTOR, WITHOUT MATING CONNECTOR, 2.62 INCH SERV ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725N-4-S-1000-K-PU-1-L-1-EY-N-N
INCREMENTAL SHAFT ENCODER, MODEL 725, STANDARD HOUSING, 1/4 INCH SHAFT, 100 KHZ, 0-70 C, 7-PIN MS, IP66 SEAL, PULL-UP RESISTOR OUTPUT, END CONNECTOR, WITHOUT MATING CONNECTOR, 2.62 INCH SERV ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
DR735-02
DISCONTINUED BY MANUFACTURER, ENCODER, 5-16 VDC
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725N-S-S-0600-Q-HV-1-F-N-EX-Y-N
INCREMENTAL SHAFT ENCODER, MODEL 725, STANDARD HOUSING, 3/8"; 0.375" SHAFT SIZE, 0° TO 70° DEGREES C OP TEMP, 600 CYCLES/REV, QUADRATURE A&B, LINE DRIVER OUTPUT, STANDARD 100 KHZ, FLANGE MOU ...
✓ IN STOCK!
Buy Surplus As Low As
CAN$661.34
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
225Q-34-0100-PU-N-N-J
ENCODER, MODEL 225Q QUADRATURE, 3/4 INCH BORE, 100 CYCLES PER REVOLUTION, PULL-UP RESISTOR OUTPUT TYPE, NO ADDITIONAL MOUNTING, NO SEAL/STANDARD, 5-PIN M12 (12 MM) CONNECTOR
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
15H-01SD-2000C5RHV-F00-T3
ENCODER, BLIND HOLLOW BORE, .25" BORE, 40MM SLOTTED FLEX MOUNT, 2000 CYCLES PER REVOLUTION, 8 POLE, 5VDC, QUADRATURE A&B WITH INDEX, LINE DRIVER, 18" CABLE, -20 TO 120 DEGREES C
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725I-S-S-0360-R-HV-1-F-1-SX-N-N
INCREMENTAL SHAFT ENCODER, MODEL 725, HEAVY DUTY INDUSTRIAL WITH INTERNAL FLEX MOUNT, 3/8"; 0.375" SHAFT SIZE, 0° TO 70° DEGREES C OP TEMP, 360 CYCLES/REV, QUADRATURE A&B WITH INDEX, LINE DR ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725I-S-S-0360-R-HV-1-F-1-EX-Y-N
INCREMENTAL SHAFT ENCODER, MODEL 725, HEAVY DUTY INDUSTRIAL WITH INTERNAL FLEX MOUNT, 3/8"; 0.375" SHAFT SIZE, 0° TO 70° DEGREES C OP TEMP, 360 CYCLES/REV, QUADRATURE A&B WITH INDEX, LINE DR ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
15T-14SF-0100NV1QOC-J00
INCREMENTAL ENCODER, MODEL 15T, THRU-BORE, BORE SIZE 8 MM, SLOTTED FLEX MOUNT 1.812 INCH (46MM), 0100 CYLCES PER REVOLUTION, NO COMMUTATION, INPUT VOLTAGE 5 TO 28 VDC, QUADRATURE A & B, OPEN ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
716-0600-S-IND12-6-S-S-Y
ENCODER, INCREMENTAL SHAFT, 716 SERIES, 4.75-24/28 V DC MAX INPUT, 20 MA OUTPUT, 600 CPR, PULL-UP RESISTOR, INDUSTRIAL HOUSING, 3/8 SHAFT DIAMETER, SINGLE SHAFT, 6-PIN CONNECTOR, W/ MATING C ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
25T-42SG-0240-NV1QHV-SMY
DISCONTINUED BY MANUFACTURER, INCREMENTAL ENCODER, ACCU-CODER, 5-28V DC
✓ IN STOCK!
Buy Surplus As Low As
CAN$642.53
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
802S--20-S-2048-R-HV-1-F-1-SK-CE
DISCONTINUED BY MANUFACTURER, INCREMENTAL ENCODER, 2 INCH SQUARE FLANGE MOUNT, STAINLESS STEEL, QUADRATURE WITH INDEX, 2048 PPR, 802S SERIES, SHAFT STYLE, 5-28 VDC, DIFFERENTIAL LINE DRIVER
✓ IN STOCK!
Buy Surplus As Low As
CAN$640.67
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
590-0725500
DISCONTINUED BY MANUFACTURER, ENCODER, INCREMENTAL, 5-28 VDC INPUT, ACCU-CODER, MODEL 725, 2.5 INCH BORE
✓ IN STOCK!
Buy Surplus As Low As
CAN$637.83
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
775-B-S-4096-R-HV-M-P-A-N-N
INCREMENTAL ENCODER, SLIM THRU-BORE, 0-70 CELSIUS OPERATING TEMPERATURE, 25 MM CLAMP STYLE, 4096 CYCLE PER REVOLUTION(CPR), LINE DRIVER, GLAND NUT WITH 24 INCH CABLE, WITHOUT ANTI-ROTATION F ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
ENC 260-C8-B-09-H-2048-R-HV-1-S-SF-4-N
ENCODER
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
260-C4-B-10-L-1000-R-HV-1-S-SF-1-N
ENCODER, FOR ELECTROCRAFT XBR-3340
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
15T-04SB-8192C5RHV-F00
ENCODER, 6MM BORE, 29MM SLOTTED FLEX MOUNT, 8192 CYCLES PER REVOLUTION,8 POLE, 5VDC FIXED VOLTAGE, QUADRATURE (A&B) WITH INDEX (Z), OUTPUT TYPE: LINE DRIVER, CONNECTOR TYPE: 18" CABLE
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725N-4-S-0400-R-HV-1-S-1-EG-N-CE
INCREMENTAL SHAFT ENCODER, MODEL 725, STANDARD HOUSING, 1/4"; 0.250" SHAFT SIZE, 0° TO 70° DEGREES C OP TEMP, 400 CYCLES/REV, QUADRATURE A&B WITH INDEX, LINE DRIVER OUTPUT, STANDARD 100 KHZ, ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
ACCUCODER
702-30-S-6000-K-HV-5-K-1-SY-N-N
ENCODER, 6000 CPR, REVERSE QUAD, LINE-DRIVER, FREQ RESPONSE 250 KHZ, HOUSING-MOUNT: SIZE 25 FLANGE, IP66, SIDE 7-PIN CONNECTOR, TEMP: 70 DEG
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
716-1200-HV-IND12-6-S-S-N
INCREMENTAL SHAFT ENCODER, QUADRATURE CUBE, 1200 CPR, LINE DRIVER OUTPUT, INDUSTRIAL HOUSING, IP66 SHAFT SEAL, 3/8" SHAFT DIAMETER, SINGLE SHAFT, 6-PIN MS
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
725I-S-S-0010-A-OC-1-F-SY-Y-N
DISCONTINUED BY MANUFACTURER, INCREMENTAL ENCODER, HEAVY DUTY, 2.5" DIAMETER, COMPLEMENTARY OUTPUTS, 5-28 VDC IN, SIDE TERMINATION
✓ IN STOCK!
Buy Surplus As Low As
CAN$623.75
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
702-20-S-1024-D-HV-1-G-1-SX-N-N
SHAFT OF BORE-SIZE: (20) 3/8 0.375, TEMPERATURE OPTION: (S) STANDARD 70 DEG, CYCLES PER REVOLUTION: 1024, NUMBER OF CHANNELS: (D) RQ GATED B LOW, OUTPUT TYPE: (HV) LINE-DRIVER, FREQUENCY RES ...
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
15H-04SB-2048C5RHV-**-F3T2-SPEC727
ENCODER, BLIND HOLLOW BORE, 6 MM BORE, 29 MM SLOTTED FLEX MOUNT, 2048 PULSES, 8 POLE, 5VDC, LINE DRIVER, EXTENDED FREQUENCY, -20 TO 100 DEGREE OPERATING TEMPERATURE
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
702-20-S-0360-D-HV-1-G-1-SX-N-N
INCREMENTAL SHAFT ENCODER, MODEL 702, SIZE 20, 3/8" SHAFT SIZE, 360 CPR, LINE DRIVER OUTPUT, 100 KHZ, 1.250" MALE PILOT MOUNTING, 10-PIN MS SIDE CONNECTOR, 0-70 DEG. C, IP66
✓ IN STOCK!
Repair Yours
Contact Us
ENCODER PRODUCTS COMPANY
702-21-S-0250-K-PP-1-T-1-EW-N-N
ENCODER, SHAFT SIZE: 10MM, 0 TO 70C, 250 CPR, REVERSE QUADRATURE A & B W/ INDEX, PUSH-PULL, 100 KHZ, SERVO MOUNT S W/ 1.250" MALE PILOT, IP66, END 6-PIN MS CONNECTOR
✓ IN STOCK!
Repair Yours
Contact Us
