Product Search

    SEARCH NOW FOR ALL YOUR CONTROL TECHNIQUES SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Filter Results
    Results 751-800 of 775.
    NIDEC CORP 6041-4100

    NIDEC CORP

    CONTROL TECHNIQUES

    6041-4100

    DISCONTINUED BY MANUFACTURER, UNIDRIVE BOARD ASSEMBLY, PCB, SCREW TERMINAL INPUT
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$1,051.80
    CAN$1,051.80
    Repair Yours CAN$736.76
    NIDEC CORP V1500

    NIDEC CORP

    CONTROL TECHNIQUES

    V1500

    DISCONTINUED BY MANUFACTURER, INVERTER DRIVE, FLUX VECTOR, 460 VAC, 15 KW, 20 HP
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$3,067.74
    CAN$3,067.74
    Repair Yours CAN$2,156.58
    NIDEC CORP 02-712880-10

    NIDEC CORP

    CONTROL TECHNIQUES

    02-712880-10

    02-712880-10 - DIG OSCILLATOR
    ✓ IN STOCK!
    CAN$1,226.66 Buy Surplus As Low As CAN$458.74
    CAN$458.74
    Repair Yours CAN$379.17
    NIDEC CORP 02-766445-00

    NIDEC CORP

    CONTROL TECHNIQUES

    02-766445-00

    DISCONTINUED BY MANUFACTURER, SNUBBER ASSEMBLY, 3-WIRE, DUAL CHANNEL
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$91.16
    CAN$91.16
    NIDEC CORP SNCE-015

    NIDEC CORP

    CONTROL TECHNIQUES

    SNCE-015

    SYNC CABLE TO CONNECT MASTER SYNCHRONIZATION ENCODER TO EP DB9 OR SNCI, 15 FT LENGTH (SCSLD-4, SCSLD-4R TO EPSILON EP OR SNCI)
    ✓ IN STOCK!
    CAN$319.07 Buy Surplus As Low As CAN$131.46
    CAN$131.46
    NIDEC CORP SM-INTERBUS

    NIDEC CORP

    CONTROL TECHNIQUES

    SM-INTERBUS

    INTERBUS INTERFACE OPTION MODULE, UP TO 63 NODES ON A NETWORK, 500KBPS FIXED DATA RATE, CYCLIC DATA SIZES OF UP TO 10 WORDS IN/OUT, NON-CYCLIC ACCESS SUPPORTED USING STANDARD PCP PROTOCOL
    ✓ IN STOCK!
    CAN$1,074.43 Buy Surplus As Low As CAN$627.03
    CAN$627.03
    Repair Yours CAN$360.00
    NIDEC CORP SM-ETC

    NIDEC CORP

    CONTROL TECHNIQUES

    SM-ETC

    15 PIN CONNECTOR, BREAK OUT BOARD, FOR ENCODER FEEDBACK CABLE, DB15 TO TERMINAL
    ✓ IN STOCK!
    CAN$232.27 Buy Surplus As Low As CAN$140.24
    CAN$140.24
    NIDEC CORP SM-ENCODER-PLUS

    NIDEC CORP

    CONTROL TECHNIQUES

    SM-ENCODER-PLUS

    ENCODER PLUS SOLUTIONS MODULE, INPUT OPTION MODULE, CLOSED LOOP VECTOR MOTOR FEEDBACK, MARKER PULSE, 500KHZ MAX, 5V / 8V / 15V SIGNALS, 82000000011700
    ✓ IN STOCK!
    CAN$507.84 Buy Surplus As Low As CAN$276.39
    CAN$276.39
    NIDEC CORP SLB-3400037

    NIDEC CORP

    CONTROL TECHNIQUES

    SLB-3400037

    DISCONTINUED BY MANUFACTURER, AC DRIVE, COMMANDER SL (SIZE B), 0.5HP, 460V - 3PH
    ✓ IN STOCK!
    Buy Surplus As Low As CAN$489.90
    CAN$489.90
    Repair Yours CAN$369.61
    NIDEC CORP NTM-207-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTM-207-CONS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, METRIC FLANGE, 2 IN FRAME, 7.5 LB-IN / 0.85 NM, 5000 RPM, 1.7 AMP, 0.432 KW, IP65, MS CONNECTOR, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDARD ...
    ✓ IN STOCK!
    CAN$2,881.89 Buy Surplus As Low As CAN$1,651.66
    CAN$1,651.66
    Repair Yours CAN$1,102.33
    NIDEC CORP CMDS-005

    NIDEC CORP

    CONTROL TECHNIQUES

    CMDS-005

    MOTOR POWER CABLE, MOLDED CONNECTOR ON MOTOR END, FERRULES ON DRIVE END, 5 FT LENGTH (2&3" NT, MG & MH MOTORS)
    ✓ IN STOCK!
    CAN$527.52 Buy Surplus As Low As CAN$195.73
    CAN$195.73
    NIDEC CORP NTM-212-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTM-212-CONS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, METRIC FLANGE, 2 IN FRAME, 12.5 LB-IN / 1.4 NM, 5000 RPM, 2.7 AMP, 0.74 KW, IP65, MS CONNECTOR, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDARD F ...
    ✓ IN STOCK!
    CAN$3,493.26 Buy Surplus As Low As CAN$1,399.04
    CAN$1,399.04
    Repair Yours CAN$1,084.99
    NIDEC CORP NTM-345-CBNS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTM-345-CBNS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, METRIC FLANGE, 3 IN FRAME, 47.5 LB-IN / 3.56 NM, 3000 RPM, 6.59 AMP, 1.67 KW, IP65, MS CONNECTOR, 24 VDC HOLDING BRAKE, 2048 PPR ENCODER, LOW INERT ...
    ✓ IN STOCK!
    CAN$5,642.90 Buy Surplus As Low As CAN$2,287.85
    CAN$2,287.85
    Repair Yours CAN$2,052.71
    NIDEC CORP NTE-345-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTE-345-CONS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, ENGLISH FLANGE, 3 IN FRAME, 47.5 LB-IN / 3.56 NM, 3000 RPM, 6.59 AMP, 1.67 KW, IP65, MS CONNECTOR, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDAR ...
    ✓ IN STOCK!
    CAN$3,973.36 Buy Surplus As Low As CAN$2,120.65
    CAN$2,120.65
    Repair Yours CAN$1,220.81
    NIDEC CORP 8200-00108

    NIDEC CORP

    CONTROL TECHNIQUES

    8200-00108

    DB RESISTOR, 150% E-STOP BRAKING TORQUE FOR 50HP MOTOR @ 240VDC; WALL MOUNTED
    ✓ IN STOCK!
    CAN$523.51 Buy Surplus As Low As CAN$328.50
    CAN$328.50
    NIDEC CORP NTM-330-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTM-330-CONS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, METRIC FLANGE, 3 IN FRAME, 31.5 LB-IN / 3.56 NM, 4000 RPM, 6.25 AMP, 1.49 KW, IP65, MS CONNECTOR, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDARD ...
    ✓ IN STOCK!
    CAN$3,861.15 Buy Surplus As Low As CAN$1,926.96
    CAN$1,926.96
    Repair Yours CAN$1,222.33
    NIDEC CORP MGE-208-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    MGE-208-CONS-0000

    SERVO MOTOR, MG FAMILY, ENGLISH MOUNTING FLANGE, 2" FRAME, 8 LB.-IN. CONT. TORQUE, 2.3/7.8 AMPS (CONT./PEAK), 5000 RPM, MS CONNECTOR, W/O BRAKE, ENCODER FEEDBACK TYPE, STANDARD SHAFT SEAL, I ...
    ✓ IN STOCK!
    CAN$3,736.72 Buy Surplus As Low As CAN$2,012.23
    CAN$2,012.23
    Repair Yours CAN$1,021.58
    NIDEC CORP MGE-455-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    MGE-455-CONS-0000

    SERVO MOTOR, MG FAMILY, ENGLISH MOUNTING FLANGE, 4" FRAME, 68 LB.-IN. CONT. TORQUE, 7.2/26.4 AMPS (CONT./PEAK), 3000 RPM, MS CONNECTOR, W/O BRAKE, ENCODER FEEDBACK TYPE, STANDARD SHAFT SEAL, ...
    ✓ IN STOCK!
    CAN$8,921.67 Buy Surplus As Low As CAN$3,691.27
    CAN$3,691.27
    Repair Yours CAN$2,194.70
    NIDEC CORP SM-SERCOS

    NIDEC CORP

    CONTROL TECHNIQUES

    SM-SERCOS

    SERCOS SOLUTIONS MODULE, DRIVE OPTIONS
    ✓ IN STOCK!
    CAN$984.66 Buy Surplus As Low As CAN$565.13
    CAN$565.13
    Repair Yours CAN$468.33
    NIDEC CORP XVM-403-TBNS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    XVM-403-TBNS-0000

    SERVO MOTOR, XV SERIES, 230 VAC, 50/60 HZ, 40 MM FRAME SIZE, 0.32 NM / 2.8 LB-IN TORQUE, 3000 RPM, AMP CONNECTOR ON FLYING LEADS, 24 VDC HOLDING BRAKE, 2048 PPR INCCREMENTAL ENCODER, STANDAR ...
    ✓ IN STOCK!
    CAN$2,593.35 Buy Surplus As Low As CAN$1,294.29
    CAN$1,294.29
    Repair Yours CAN$891.34
    NIDEC CORP SNCO-003

    NIDEC CORP

    CONTROL TECHNIQUES

    SNCO-003

    SYNC OUT CABLE, D9P - 7 PIN MINI-DIN, 3 FT LENGTH (FM3/4 TO SNCI)
    ✓ IN STOCK!
    CAN$215.49 Buy Surplus As Low As CAN$147.22
    CAN$147.22
    NIDEC CORP SM-UNI-ENCODER

    NIDEC CORP

    CONTROL TECHNIQUES

    SM-UNI-ENCODER

    SOLUTION MODULE, ADD-ON OPTION, SIMULATED ENCODER OUTPUT, QUADRATURE, FREQUENCY / DIRECTION, FORWARD / REVERSE, SINCOS, FOR UNIDRIVE SP, (SM-UNIVERSAL-ENCODER-PLUS), (82000000011310)
    ✓ IN STOCK!
    CAN$958.54 Buy Surplus As Low As CAN$483.81
    CAN$483.81
    NIDEC CORP SM-I/O-PLUS

    NIDEC CORP

    CONTROL TECHNIQUES

    SM-I/O-PLUS

    I/O INTERFACE SOLUTION MODULE, YELLOW, 3 DIGITAL INPUTS, 2 ANALOG INPUTS, 1 ANALOG OUTPUT, RELAY X 2
    ✓ IN STOCK!
    CAN$540.32 Buy Surplus As Low As CAN$304.62
    CAN$304.62
    Repair Yours CAN$252.71
    NIDEC CORP NTM-355-CONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    NTM-355-CONS-0000

    SERVO MOTOR, NT SERIES, 230 VAC, 50/60 HZ, METRIC FLANGE, 3 IN FRAME, 55.5 LB-IN / 6.27 NM, 3000 RPM, 7.6 AMP, 1.97 KW, IP65, MS CONNECTOR, UNBRAKED, 2048 PPR ENCODER, LOW INERTIA, STANDARD ...
    ✓ IN STOCK!
    CAN$5,337.22 Buy Surplus As Low As CAN$2,360.99
    CAN$2,360.99
    Repair Yours CAN$1,960.00
    NIDEC CORP XVM-6011-TONS-0000

    NIDEC CORP

    CONTROL TECHNIQUES

    XVM-6011-TONS-0000

    SERVO MOTOR, XV SERIES, 230 VAC, 50/60 HZ, 60 MM FRAME SIZE, 1.27 NM / 11.2 LB-IN TORQUE, 3000 RPM, AMP CONNECTOR ON FLYING LEADS, UNBRAKED, 2048 PPR INCCREMENTAL ENCODER, STANDARD INERTIA
    ✓ IN STOCK!
    CAN$1,936.11 Buy Surplus As Low As CAN$963.48
    CAN$963.48
    Repair Yours CAN$672.97
    Previous
    6 7 8 9 10 11 12 13 14 15 16