Product Search

    SEARCH NOW FOR ALL YOUR AUTOMOTION SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Filter Results
    Results 851-900 of 996.
    AUTOMATION DIRECT MTPM-P50-1L18

    AUTOMATION DIRECT

    IRONHORSE

    MTPM-P50-1L18

    IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/2HP, 90 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
    CAN$821.00 Buy Surplus As Low As CAN$493.00
    CAN$493.00
    Repair Yours CAN$410.00
    AUTOMATION DIRECT LARSA1-12L36C

    AUTOMATION DIRECT

    SURE MOTION

    LARSA1-12L36C

    SUREMOTION SLIDE ELEMENT, END SUPPORTED, ROUND SHAFT, 3/4IN SHAFT DIAMETER, 36IN OVERALL LENGTH, CARBON STEEL. (2) SINGLE PILLOW BLOCKS INCLUDED.
    CAN$1,165.83 Buy Surplus As Low As CAN$721.65
    CAN$721.65
    AUTOMATION DIRECT MTGR-P14-1L178

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P14-1L178

    GEAR MOTOR, MTGR SERIES, RIGHT ANGLE, SINGLE SHAFT DC, 44 LB-IN FULL LOAD TORQUE, 1.64 FLA, 10:1 RATIO, 1/7 HP, 178 RPM, 90 VDC, 5/8 INCH SHAFT DIAMETER.
    ✓ IN STOCK!
    CAN$1,170.08 Buy Surplus As Low As CAN$915.94
    CAN$915.94
    Repair Yours CAN$509.50
    AUTOMATION DIRECT MTGR-P14-1L022

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P14-1L022

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 22RPM, 280 LB-IN FULL LOAD TORQUE, 1.41 FLA, 82:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,170.08 Buy Surplus As Low As CAN$723.11
    CAN$723.11
    Repair Yours CAN$514.31
    AUTOMATION DIRECT WGA-50M-010-H1

    AUTOMATION DIRECT

    IRONHORSE

    WGA-50M-010-H1

    IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2.12HP AT 1.0 SF, 664 LB-IN MECHANICAL OUTPUT TORQUE, 50MM CENTER DISTANCE, CAST AL ...
    ✓ IN STOCK!
    CAN$826.27 Buy Surplus As Low As CAN$276.82
    CAN$276.82
    Repair Yours CAN$300.00
    AUTOMATION DIRECT MTGR-P14-1L040

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P14-1L040

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 40RPM, 185 LB-IN FULL LOAD TORQUE, 1.64 FLA, 44:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,177.17 Buy Surplus As Low As CAN$727.49
    CAN$727.49
    Repair Yours CAN$511.75
    AUTOMATION DIRECT DC-SBS63-2020

    AUTOMATION DIRECT

    SURE MOTION

    DC-SBS63-2020

    SUREMOTION DRIVE COUPLING, SERVO-BEAM, STAINLESS STEEL, SETSCREW, SIZE 63, 1-1/4IN BORE.
    CAN$1,177.17 Buy Surplus As Low As CAN$727.49
    CAN$727.49
    AUTOMATION DIRECT MTGR-P20-1K039

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P20-1K039

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 39RPM, 263 LB-IN FULL LOAD TORQUE, 8.74 FLA, 44:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,185.68 Buy Surplus As Low As CAN$733.34
    CAN$733.34
    Repair Yours CAN$513.76
    AUTOMATION DIRECT MTR2-1P5-1AB18

    AUTOMATION DIRECT

    IRONHORSE

    MTR2-1P5-1AB18

    IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 1-1/2HP, 1-PHASE, 115/230 VAC, 1800RPM, TEFC, NEMA 56HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT.
    ✓ IN STOCK!
    CAN$840.38 Buy Surplus As Low As CAN$427.29
    CAN$427.29
    Repair Yours CAN$341.98
    AUTOMATION DIRECT ACNND-25P0

    AUTOMATION DIRECT

    IRONHORSE

    ACNND-25P0

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 5HP WITH 3-PHASE INPUT, 2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTION ...
    CAN$1,194.19 Buy Surplus As Low As CAN$739.18
    CAN$739.18
    Repair Yours CAN$519.17
    AUTOMATION DIRECT MTGR-P20-1K023

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P20-1K023

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 23RPM, 280 LB-IN FULL LOAD TORQUE, 5.64 FLA, 82:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,199.86 Buy Surplus As Low As CAN$742.10
    CAN$742.10
    Repair Yours CAN$521.64
    AUTOMATION DIRECT MTGR-P20-1K174

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P20-1K174

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 174RPM, 63 LB-IN FULL LOAD TORQUE, 8.75 FLA, 10:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,199.86 Buy Surplus As Low As CAN$742.10
    CAN$742.10
    Repair Yours CAN$521.64
    AUTOMATION DIRECT MTGR-P20-1K075

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P20-1K075

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 75RPM, 137 LB-IN FULL LOAD TORQUE, 8.72 FLA, 23:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,199.86 Buy Surplus As Low As CAN$742.10
    CAN$742.10
    Repair Yours CAN$528.08
    AUTOMATION DIRECT ACN-40P5

    AUTOMATION DIRECT

    IRONHORSE

    ACN-40P5

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 1/2HP WITH 3-PHASE INPUT, 1/6HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYN ...
    CAN$1,214.05 Buy Surplus As Low As CAN$750.87
    CAN$750.87
    Repair Yours CAN$527.82
    AUTOMATION DIRECT MTRP-1P5-3BD18

    AUTOMATION DIRECT

    IRONHORSE

    MTRP-1P5-3BD18

    IRONHORSE MTR PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE AND INVERTER RATED, 1-1/2HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, NEMA 56C/HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE R ...
    ✓ IN STOCK!
    CAN$856.80 Buy Surplus As Low As CAN$401.10
    CAN$401.10
    Repair Yours CAN$355.71
    AUTOMATION DIRECT WG-262-060-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-060-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
    CAN$1,216.88 Buy Surplus As Low As CAN$752.33
    CAN$752.33
    Repair Yours CAN$535.59
    AUTOMATION DIRECT WG-262-005-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-005-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 182TC INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 5.24HP AT 1.0 SF, 924 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
    CAN$1,216.88 Buy Surplus As Low As CAN$752.33
    CAN$752.33
    Repair Yours CAN$529.06
    AUTOMATION DIRECT WG-262-010-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-010-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182TC INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 4.17HP AT 1.0 SF, 1445 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANC ...
    CAN$1,216.88 Buy Surplus As Low As CAN$752.33
    CAN$752.33
    Repair Yours CAN$529.06
    AUTOMATION DIRECT WG-262-015-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-015-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 3.22HP AT 1.0 SF, 1577 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
    CAN$1,216.88 Buy Surplus As Low As CAN$752.33
    CAN$752.33
    Repair Yours CAN$535.59
    AUTOMATION DIRECT WG-262-020-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-020-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 2.67HP AT 1.0 SF, 1563 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
    CAN$1,216.88 Buy Surplus As Low As CAN$752.33
    CAN$752.33
    Repair Yours CAN$529.06
    AUTOMATION DIRECT WG-262-040-H

    AUTOMATION DIRECT

    IRONHORSE

    WG-262-040-H

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
    CAN$1,216.88 Buy Surplus As Low As CAN$752.33
    CAN$752.33
    Repair Yours CAN$529.06
    AUTOMATION DIRECT MTSP-P50-3BD18

    AUTOMATION DIRECT

    IRONHORSE

    MTSP-P50-3BD18

    IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, WASHDOWN AND INVERTER RATED, 1/2HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, NEMA 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT ...
    CAN$1,222.56 Buy Surplus As Low As CAN$756.71
    CAN$756.71
    Repair Yours CAN$531.53
    AUTOMOTION ALC2502010102R

    AUTOMOTION

    ALC2502010102R

    SERVO DRIVE 15AMP 115VAC 50/60HZ 1PHASE
    CAN$1,228.56 Buy Surplus As Low As CAN$736.26
    CAN$736.26
    Repair Yours CAN$521.71
    AUTOMATION DIRECT MTSN-P50-3BD18

    AUTOMATION DIRECT

    IRONHORSE

    MTSN-P50-3BD18

    IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, WASHDOWN AND INVERTER RATED, 1/2HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TENV, NEMA 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT ...
    CAN$1,234.78 Buy Surplus As Low As CAN$658.04
    CAN$658.04
    Repair Yours CAN$446.06
    AUTOMATION DIRECT ACN-41P0

    AUTOMATION DIRECT

    IRONHORSE

    ACN-41P0

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAM ...
    CAN$1,236.74 Buy Surplus As Low As CAN$765.47
    CAN$765.47
    Repair Yours CAN$537.71
    AUTOMATION DIRECT MTGR-P14-1L064

    AUTOMATION DIRECT

    IRONHORSE

    MTGR-P14-1L064

    IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 64RPM, 116 LB-IN FULL LOAD TORQUE, 1.65 FLA, 28:1 RATIO, 5/8IN SHAFT DIAMETER.
    CAN$1,260.85 Buy Surplus As Low As CAN$780.08
    CAN$780.08
    Repair Yours CAN$555.61
    AUTOMATION DIRECT ACN-22P0

    AUTOMATION DIRECT

    IRONHORSE

    ACN-22P0

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 2HP WITH 3-PHASE INPUT, 1HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC ...
    CAN$1,297.73 Buy Surplus As Low As CAN$801.99
    CAN$801.99
    Repair Yours CAN$563.67
    AUTOMATION DIRECT WG-237-020-L

    AUTOMATION DIRECT

    IRONHORSE

    WG-237-020-L

    IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1195 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANC ...
    ✓ IN STOCK!
    CAN$927.96 Buy Surplus As Low As CAN$354.42
    CAN$354.42
    Repair Yours CAN$304.36
    AUTOMATION DIRECT HGR-37-010-B

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-010-B

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 10:1 RATIO, 145TC-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2HP AT 1.0 SF, 670 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOU ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-010-A

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-010-A

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 10:1 RATIO, 56C-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1HP AT 1.0 SF, 340 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOUSI ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-060-A

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-060-A

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 60:1 RATIO, 56C-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.82HP AT 1.0 SF, 1770 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON H ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-030-B

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-030-B

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 30:1 RATIO, 145TC-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2HP AT 1.0 SF, 2020 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HO ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-020-B

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-020-B

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 20:1 RATIO, 145TC-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2HP AT 1.0 SF, 1350 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HO ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-015-B

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-015-B

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 15:1 RATIO, 145TC-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2HP AT 1.0 SF, 950 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOU ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-015-A

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-015-A

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 15:1 RATIO, 56C-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1HP AT 1.0 SF, 530 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOUSI ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-005-B

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-005-B

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 5:1 RATIO, 145TC-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2HP AT 1.0 SF, 330 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOUS ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-040-A

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-040-A

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 40:1 RATIO, 56C-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1HP AT 1.0 SF, 1310 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOUS ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT HGR-37-020-A

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-020-A

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 20:1 RATIO, 56C-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1HP AT 1.0 SF, 670 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOUSI ...
    CAN$1,319.00 Buy Surplus As Low As CAN$815.14
    CAN$815.14
    Repair Yours CAN$573.56
    AUTOMATION DIRECT MTPM-P75-1M18

    AUTOMATION DIRECT

    IRONHORSE

    MTPM-P75-1M18

    IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 3/4HP, 180 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
    ✓ IN STOCK!
    CAN$933.44 Buy Surplus As Low As CAN$504.48
    CAN$504.48
    Repair Yours CAN$417.52
    AUTOMOTION ALC2501-010-102R

    AUTOMOTION

    ALC2501-010-102R

    SERVO DRIVE, INPUT, 115VAC 50/60HZ, OUTPUT, 15-25AMP, 160VDC
    CAN$1,330.52 Buy Surplus As Low As CAN$471.39
    CAN$471.39
    Repair Yours CAN$360.22
    AUTOMATION DIRECT ACN-42P0

    AUTOMATION DIRECT

    IRONHORSE

    ACN-42P0

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 2HP WITH 3-PHASE INPUT, 3/4HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAM ...
    CAN$1,331.76 Buy Surplus As Low As CAN$823.91
    CAN$823.91
    Repair Yours CAN$579.74
    AUTOMATION DIRECT LARSB1-08L36C

    AUTOMATION DIRECT

    SURE MOTION

    LARSB1-08L36C

    SUREMOTION SLIDE ELEMENT, CONTINUOUSLY SUPPORTED, ROUND SHAFT, 1/2IN SHAFT DIAMETER, 36IN OVERALL LENGTH, CARBON STEEL. (2) SINGLE PILLOW BLOCKS INCLUDED.
    CAN$1,331.76 Buy Surplus As Low As CAN$823.91
    CAN$823.91
    AUTOMATION DIRECT HGR-37-030-A

    AUTOMATION DIRECT

    IRONHORSE

    HGR-37-030-A

    IRONHORSE HEAVY-DUTY HELICAL GEARBOX, 30:1 RATIO, 56C-FACE INPUT, INLINE, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1HP AT 1.0 SF, 1010 LB-IN MECHANICAL OUTPUT TORQUE, TYPE-37 FRAME, CAST IRON HOUS ...
    CAN$1,332.19 Buy Surplus As Low As CAN$823.29
    CAN$823.29
    Repair Yours CAN$580.64
    AUTOMATION DIRECT MTGP-P20-1K036

    AUTOMATION DIRECT

    IRONHORSE

    MTGP-P20-1K036

    IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 36RPM, 245 LB-IN FULL LOAD TORQUE, 7.89 FLA, 46:1 RATIO, 5/8IN SHAFT DIAMETER.
    ✓ IN STOCK!
    CAN$944.39 Buy Surplus As Low As CAN$567.88
    CAN$567.88
    Repair Yours CAN$471.34
    AUTOMATION DIRECT ACN-23P0

    AUTOMATION DIRECT

    IRONHORSE

    ACN-23P0

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 3HP WITH 3-PHASE INPUT, 1-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYN ...
    CAN$1,381.40 Buy Surplus As Low As CAN$854.58
    CAN$854.58
    Repair Yours CAN$600.75
    AUTOMATION DIRECT LARSB1-16L12C

    AUTOMATION DIRECT

    SURE MOTION

    LARSB1-16L12C

    SUREMOTION SLIDE ELEMENT, CONTINUOUSLY SUPPORTED, ROUND SHAFT, 1IN SHAFT DIAMETER, 12IN OVERALL LENGTH, CARBON STEEL. (2) SINGLE PILLOW BLOCKS INCLUDED.
    CAN$1,391.33 Buy Surplus As Low As CAN$860.43
    CAN$860.43
    AUTOMATION DIRECT ACNND-45P0

    AUTOMATION DIRECT

    IRONHORSE

    ACNND-45P0

    IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 5HP WITH 3-PHASE INPUT, 2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTION ...
    CAN$1,395.59 Buy Surplus As Low As CAN$863.35
    CAN$863.35
    Repair Yours CAN$615.05
    AUTOMATION DIRECT LARSA1-16L12C

    AUTOMATION DIRECT

    SURE MOTION

    LARSA1-16L12C

    SUREMOTION SLIDE ELEMENT, END SUPPORTED, ROUND SHAFT, 1IN SHAFT DIAMETER, 12IN OVERALL LENGTH, CARBON STEEL. (2) SINGLE PILLOW BLOCKS INCLUDED.
    CAN$1,398.42 Buy Surplus As Low As CAN$864.81
    CAN$864.81
    AUTOMATION DIRECT LARSB1-12L24C

    AUTOMATION DIRECT

    SURE MOTION

    LARSB1-12L24C

    SUREMOTION SLIDE ELEMENT, CONTINUOUSLY SUPPORTED, ROUND SHAFT, 3/4IN SHAFT DIAMETER, 24IN OVERALL LENGTH, CARBON STEEL. (2) SINGLE PILLOW BLOCKS INCLUDED.
    CAN$1,398.42 Buy Surplus As Low As CAN$864.81
    CAN$864.81
    AUTOMOTION ALC15D2-010-102R

    AUTOMOTION

    ALC15D2-010-102R

    POWER SUPPLY SERVO DRIVE INPUT 230VAC 50/60HZ
    CAN$1,405.32 Buy Surplus As Low As CAN$702.66
    CAN$702.66
    Repair Yours CAN$566.32
    Previous Next
    10 11 12 13 14 15 16 17 18 19 20